預制隔離墩模具 樂豐隔離墩模具 可做翻轉架 出模方便

隔離墩模具的使用大部分在公路兩側或者中央，具體到應用工程中會有不同的圖紙?jiān)O(shè)計，而且分離式以及連續式的隔離墩在兩側的設計不同。使用中央隔離墩模具生產中央隔離墩，其模具的質量是影響產品質量的關鍵，所以中央隔離墩模具用上等鋼材制成，從而保證了產品能夠有較強的精度及強度。中央隔離墩模具主要由面板和筋板構成，根據不同的規格，所使用的面板和筋板厚度是有所不同的，在保證了產品質量的同時，可以降低成本，回饋給顧客，同時一側還有翻轉結構，筋板焊接在面板外，主要是加強模具的抗壓能力，要知道在生產時，要利用混凝土澆灌，在澆灌時模具要承受很大壓力，如果沒有筋板，模具就很容易變形甚至破裂，導致生產的產品不合格而無法正常使用，這也是為何不用塑料而用鋼板。翻轉結構的存在，大大方便了脫模操作。在生產中央隔離墩模具時，選擇用螺絲而不用卡扣，因?yàn)槟＞咭L(zhǎng)時間使用，螺絲的壽命要比卡扣長，這就降低了更換頻率，生產出好的產品。

Most of the use of isolation pier mold is on both sides or in the center of the highway. There will be different drawing designs in the application engineering, and the design of separation and continuous isolation pier on both sides is different. The quality of the mould is the key to affect the quality of the product. So the mould of the central isolating pier is made of high-grade steel, which can ensure that the product can have a strong precision and strength. The mold of the central isolation pier is mainly composed of the panel and the reinforcement plate. According to different specifications, the thickness of the panel and the reinforcement plate used is different. While ensuring the product quality, it can reduce the cost and give back to the customer. At the same time, there is a turnover structure on one side, and the reinforcement plate is welded outside the panel, which is mainly to strengthen the compressive capacity of the mold. It is necessary to use concrete in production When pouring, the mold must bear a lot of pressure. If there is no rib plate, the mold will easily deform or even crack, resulting in the unqualified products and can not be used normally. This is why the steel plate is used instead of plastic. The existence of the turnover structure greatly facilitates the demoulding operation. In the production of the mould for the central isolation pier, the screw is chosen instead of the buckle, because the mould needs to be used for a long time, and the life of the screw is longer than the buckle, which reduces the replacement frequency and produces a good product.

預制隔離墩模具 樂豐隔離墩模具 產品工藝

隔離墩鋼模具模具的質量成為整個市場的關鍵，對于模具來說，鋼模具的質量關鍵在于是否是純料，也或者說是摻有肥料，作為企業保障隔離墩鋼模具的質量成為了關鍵，也是企業發展的先決條件。在隔離墩鋼模具的制造中采用放電加工是越來越普遍采用的加工方，,但是放電加工引起的缺陷也是很多的。由于放電加工是借助于放電所產生的高溫而使模。表面熔化的加工方法，因此，在其加工表面形成白色的放電加工變質層，并產生強大地拉應力，這樣，在模具的電加工過程中常出現變形或裂紋等缺陷。模具因?yàn)樯a(chǎn)工藝的不同促使了工程不斷地使用，這種模具擁有簡單的生產工藝，不斷地能夠滿足于市場的發展。

The quality of steel mould for isolated pier has become the key of the whole market. For mould, the quality of steel mould depends on whether it is pure material or mixed with fertilizer. As the key to ensure the quality of steel mould for isolated pier, it is also the prerequisite for the development of the enterprise. EDM is more and more widely used in the manufacture of steel mould for isolation pier, but there are many defects caused by EDM. Because EDM is made by means of the high temperature produced by discharge. As a result, a white modified layer of EDM is formed on the surface of the die, and a strong tensile stress is generated. In this way, defects such as deformation or crack often appear in the process of EDM of the die. Because of the difference of production technology, the mould is used continuously. This kind of mould has simple production technology and can satisfy the development of market.