進口氣動高真空球閥德國洛克

一、進口氣動高真空球閥技術參數：

1、閥門漏率：≤1.3×10-4Pa.L/S.

2、尺寸規格：DN15-DN200

3、適用溫度：-30～+150℃ (PPL密封)

4、氣源壓力：0.4～0.6MPa

5、適用范圍：Applicability

6、連接型式：使用壓力范圍(Pa)

7、活套法蘭(GB6070) 0.6×106～1.3×10-4

8、焊接法蘭(GB6070) 1.6×106～1.3×10-4

9、快卸法蘭(GB4982) 0.1×106～1.3×10-4

10、螺紋連接：1.6×106～1.3×10-4

1. Valve leakage rate: ≤ 1.3 × 10-4pa.l/s

2. Dimensions: DN15-dn200

3. Applicable temperature: - 30 ～ + 150 ℃ (PPL seal)

4. Air source pressure:  0.4 ～ 0.6MPa

5. Scope of application: applicability

6. Connection type loose flange service pressure range (PA)

7. Looper flange (gb6070) 0.6 × 106 ～ 1.3 × 10-4

8. Welding flange (gb6070) 1.6 × 106 ～ 1.3 × 10-4

9. Quick release flange (gb4982) 0.1 × 106 ～ 1.3 × 10-4

10. Threaded connection 1.6 × 106 ～ 1.3 × 10-4

二、進口氣動高真空球閥結構優點：

1、密封結構設計獨特漏率可達到＜1×10-10Pa.M3/S,改變了球閥不能滿足高真空、超高真空的現狀；

2、開關扭矩小,配置氣動執行器小，工作穩定，可靠；

3、結構緊湊,重量輕,外形簡潔、美觀；

4、氣動高真空球閥既能適用高真空又能適用一定的正壓力下使用由于球閥全通導又能達到超高真空要求,所以氣動真空球閥也能適用于加速器真空系統。

1. The unique leakage rate of sealing structure design can be less than 1 × 10-10pa.m3/s, which changes the current situation that ball valve can not meet high vacuum and ultra-high vacuum;

2. Small switch torque, small configuration of pneumatic actuator, stable and reliable operation;

3. Compact structure, light weight, simple and beautiful appearance;

4. The pneumatic high vacuum ball valve can be used in both high vacuum and positive pressure. Because the ball valve is fully open and can meet the requirements of ultra-high vacuum, the pneumatic vacuum ball valve can also be used in the accelerator vacuum system.

三、進口氣動高真空球閥工作原理：

a、當氣動執行器與電路和系統氣源接通后，空氣通過管道A或B管進入A缸（B缸）推動b、活塞向一端運動，從而帶動旋轉軸和球芯轉動90°
c、氣動執行器頂部連動可視器，當綠色標志指向“開”字時標志閥門開啟。
d、回信器信號燈綠燈亮?xí)r閥門處在開啟位置，而紅燈亮?xí)r閥門處在關閉位置
e、氣動高真空球閥定位器可調節閥門管道流量

a. When the pneumatic actuator is connected with the circuit and the system air source, the air enters the a cylinder (b cylinder) through the pipe a or B and pushes the B piston to move towards one end, thus driving the rotating shaft and the ball core to rotate 90 °

c. The top of the pneumatic actuator is connected with the visualizer. When the green mark points to the "on" word, it indicates that the valve is opened.

d. The valve is in the open position when the green light is on, and the valve is in the closed position when the red light is on

e. Pneumatic high vacuum ball valve positioner can adjust valve pipeline flow

四、進口氣動高真空球閥描述：

德國《LOCKE》洛克進口氣動高真空球閥(Pneumatic high vacuum valve)是雙（單）作用氣動活塞式執行器與進口LOCKE高壓球閥組成，氣動高真空球閥是一種自動控制和遙控的新型閥門。

廣泛的用于加氣站、裝罐車等高壓管道，其連接形式分內螺紋（G/NPT）、焊接、卡套等。氣動活塞式執行器采用低摩擦材料，缸體內外表面經硬質陽極氧化防腐處理，大大提高了氣缸的使用壽命。

The imported pneumatic high vacuum valve of Locke is composed of double (single) acting pneumatic piston actuator and imported Locke high pressure ball valve. The pneumatic high vacuum ball valve is a new type of valve with automatic control and remote control.

It is widely used in gas station, tank car and other high-pressure pipelines, and its connection forms include internal thread (g / NPT), welding, ferrule, etc. The pneumatic piston actuator is made of low friction materials, and the inner and outer surfaces of the cylinder block are treated by hard anodizing, which greatly improves the service life of the cylinder.