進口電動蒸汽調節閥德國洛克《DE LOCKE》廠家強烈推薦

一、進口電動蒸汽調節閥描述：

德國LOCKE洛克進口蒸汽電動調節閥,是由直行程全電子式電動執行機構和頂導向式直通低流阻單座閥組成.具有結構緊湊,重量輕,動作靈敏,流體通道呈S流線型,壓降損失小,閥  容量大,流量特性精確,直接接受調節儀表輸入的（4-20mA DC 0-10mA DC或  1-5V DC）等控制信號及單相電源即可控制運轉,實現對工藝管路流體介質的自動調節控制,廣泛應用于精確控氣體,液體,蒸汽等介質的工藝參數如壓力,流量,溫度,液位等參數保持在給定值.是符合IEC標準的新一代通用調節閥產品.

The steam electric control valve imported from Germany Locke is composed of straight stroke all electronic actuator and top guide straight through low flow resistance single seat valve. It has the advantages of compact structure, light weight, sensitive action, s-streamline fluid channel, small pressure drop loss, large valve capacity and accurate flow characteristics, It can directly receive the control signals (4-20mA DC, 0-10mA DC or 1-5V DC) from the regulating instrument and the single-phase power supply to control the operation. It can realize the automatic regulation and control of the fluid medium in the process pipeline. It is widely used to accurately control the process parameters such as pressure, flow and temperature of gas, liquid and steam, The liquid level and other parameters are kept at the given value. It is a new generation of universal control valve in accordance with IEC standard

二、進口電動蒸汽調節閥要技術參數： 

Body type: straight through casting ball valve

Nominal diameter: DN 15-200 mm

Nominal pressure: pn1.6 ～ 6.4Mpa

Flange standard: GB / t9113, JB / t79

Connection type: flange (FF RF RTJ), welding (SW BW), thread (applicable to less than 1 ″)

Valve cover type: standard type - 17 ～ + 230 ℃, high temperature type + 230 ～ + 450 ℃

Gland type: bolt compression type

Sealing packing: V-type polytetrafluoroethylene packing, asbestos packing with impregnated polytetrafluoroethylene, asbestos textile packing and graphite packing

Technical parameters of actuator

Power supply voltage: 220 V / 50 Hz

Input signal: 4-20mA or 1-5V · DC

Output signal: 4-20mA · DC

Protection grade: IP55

Explosion proof sign Exd Ⅱ BT4

Hand operated function handle

Ambient temperature - 25 ～ + 70 ℃

Ambient humidity ≤ 95%

The temperature chamber and capillary materials were H62, 1Cr18Ni9Ti

Capillary length: 3M, 5m, 10m

Temperature control range: 0 ~ 250 ℃

Set value deviation ± 2 ℃

三、進口電動蒸汽調節閥主要特點：

1、進口電動蒸汽調節閥無需外加能源能在無電無氣的場所工作既方便又節約了能源。

2、壓力分段范圍細且互相交叉，調節精度高。

3、壓力設定值在運行期間可連續設定。

4、對閥后壓力調節，閥前壓力與閥后壓力之比可為10：1～10：8。

5、橡膠膜片式檢測，執行機構測精度高、動作靈敏。

6、采用壓力平衡機構，使調節閥反應靈敏、控制精確。

1. The imported electric steam regulating valve can work in the place without electricity and gas without additional energy, which is convenient and energy saving.

2. The pressure section range is fine and cross each other, and the adjustment precision is high.

3. The pressure setting value can be set continuously during operation.

4. The ratio of the pressure in front of the valve to that in the back of the valve can be 10:1 ~ 10:8.

5. Rubber diaphragm type detection, the actuator has high precision and sensitive action.

6. The pressure balance mechanism is adopted to make the control valve sensitive and accurate.

四、進口電動蒸汽調節閥工作原理：

進口電動蒸汽調節閥由控制閥門、電動執行機構、溫度傳感器和溫度調節器等部件組成，根據用戶需要，分別有加熱型與冷卻型兩種結構。加熱型調節閥的結構與原理：工作前主閥芯處于半開位置，傳感器處于自然狀態。接上電源，主閥芯全開。介質由箭頭方向流入主閥體、經閥芯對儲熱箱進行加熱。當溫度升到相應設定值時，傳感器即產生相應線性信號輸入一體化執行機構，隨即驅動閥桿、閥芯產生位移，關閉主閥芯停止加熱。當溫度低于設定值時，傳感器即產生線性信號輸入一體化執行機構，驅使閥芯漸開，使介質按拋物線特性流入儲熱箱，進行加熱直至設定值。這樣被控介質始終在設定溫度范圍內被控制，從而達到控溫目的。備注：常說的加熱型、冷卻型。在此閥中只要更換閥芯結構即可以實現。

The imported electric steam regulating valve is composed of control valve, electric actuator, temperature sensor and temperature regulator. According to the needs of users, there are two types of structure: heating type and cooling type. Structure and principle of heating type regulating valve: before working, the main valve core is in half open position, and the sensor is in natural state. Connect the power supply and open the main valve core. The medium flows into the main valve body from the arrow direction and heats the heat storage tank through the valve core. When the temperature rises to the corresponding set value, the sensor will generate the corresponding linear signal, input the integrated actuator, and then drive the valve stem and spool to produce displacement, close the main valve core and stop heating. When the temperature is lower than the set value, the sensor generates a linear signal, which is input into the integrated actuator to drive the spool gradually open, so that the medium flows into the heat storage tank according to the parabolic characteristics, and heats up to the set value. In this way, the controlled medium is always controlled within the set temperature range, so as to achieve the purpose of temperature control. Remarks: heating type, cooling type. In this valve, it can be realized as long as the valve core structure is changed.