隔離帶鋼模具的簡介是參照大樣圖生產的，因?yàn)楦綦x帶鋼模具屬于大型混凝土預制塊模具，所以對于模具的質量要求非常嚴格，尤其是鋼板的厚度，因?yàn)槿绻摪灞×说脑挿浅Ｈ菀滓鹉＞叩淖冃?，?dǎo)致二次無法使用。隔離帶鋼模具基本知識是按照不同的圖紙要求進行下料、生產，這就形成了一整套護欄模具的生產模式，來圖定制或者按照具體模具尺寸進行加工。隔離帶鋼模具生產分為兩種，一種是預制生產，一種是現場澆筑，兩種生產模式對應的模具樣式也有區分，按照模具規格大小來確定使用何種生產方式。The use mode and description of the isolation strip steel mold are on both sides and in the middle of the highway or expressway, and there are many names for the concrete isolation strip steel mold, such as the isolation strip mold, anti-collision barrier mold, separation strip mold, etc. Although the names are different, the production of the actual mold and precast block is the same path. From the simple and small isolation pier mold used in the past to the large-scale concrete isolation strip mold with more and more complex drawing design, the whole process is a manifestation of the technological progress of the mold production. At present, the main application scope of isolation strip steel mold includes parking lot, community, highway, expressway, square, etc. as long as the flow of people and vehicles is involved, the concrete isolation belt will be applied.

The introduction of the isolated strip steel mold is produced with reference to the detail drawing. Because the isolated strip steel mold belongs to a large concrete precast block mold, the quality requirements for the mold are very strict, especially the thickness of the steel plate, because if the steel plate is thin, it is very easy to cause the deformation of the mold, resulting in secondary unusable. The basic knowledge of isolated strip steel mold is to cut and produce according to different drawing requirements, which forms a complete set of production mode of guardrail mold, which can be customized according to the drawing or processed according to the specific mold size. There are two kinds of isolated strip steel mold production, one is prefabrication production and the other is on-site pouring. The mold styles corresponding to the two production modes are also distinguished, and the production mode is determined according to the mold specification.