圓形井室鋼模具使用步驟與分析：
1.噴油：將圓形井室鋼模具內部均勻刷上油，方便脫模，同時要確保模具內壁每一個角落都刷上油，如果刷涂不均勻的話，會出現脫模困難等問題，致使成品受損，浪費材料。
2.灌漿：將混凝土倒入模具，用震動棒將其震動，排除氣泡，通過強有力的震動方式，可以做到夯實混凝土的目的，從而強化水泥構件，使其更加堅固耐用。
3.脫模：將灌漿的模具放到室外晾曬，大概24小時后，等到水泥初期凝固便可脫模。
4.養護：將制成的成品澆水養護，這一操作連續七天以后，便可出廠。
圓形井室鋼模具是根據具體的施工工程，比如市政雨水井的購置小區、農村雨水井預制件的預埋等，根據圓形井室鋼模具所使用的地區以及具體工程不同，使用的規格以及樣式都有區分。根據市政工程使用的而言，多是根據圓形井室鋼模具圖集定制的，具體內容為井體、井口加上底座，具體操作為預制生產，因?yàn)檐囁R龍的城市道路上，現澆生產不合符實際情況。T

he use procedure and analysis of steel mould for circular well chamber:

1. Oil injection: evenly brush the inner part of the round well chamber steel mold to facilitate demoulding. At the same time, ensure that every corner of the inner wall of the mold is painted with oil. If the brush is not evenly painted, it will be difficult to demould, resulting in damage to the finished product and waste of materials.

2. Grouting: pour the concrete into the mold, shake it with a vibrating rod, and remove the bubbles. By means of strong vibration, the purpose of tamping the concrete can be achieved, so as to strengthen the cement components and make them more solid and durable.

3. Demoulding: put the grouted mold outside to dry, after about 24 hours, it can be demoulded after the initial setting of cement.

4. Maintenance: the finished product shall be watered for maintenance, which can leave the factory after seven consecutive days.

The steel mould of circular well chamber is based on the specific construction projects, such as the purchase area of municipal rainwater well, the embedded parts of rural rainwater well and so on. According to the different areas and specific projects where the steel mould of circular well chamber is used, the specifications and styles used are different. According to the use of municipal engineering, it is mostly customized according to the steel mold Atlas of circular well chamber, the specific content of which is well body, wellhead and base, and the specific operation is prefabrication production, because the cast-in-place production is inconsistent with the actual situation on the busy urban road.