進口電動散熱調節閥認準德國洛克  

 

進口電動散熱調節閥產品參數：

閥體

閥體形式 直通鑄造球型閥

公稱通徑 DN25～300mm

公稱壓力 PN1.6、2.5、4.0、6.4

法蘭標準 GB/T9113、 JB/T79

連接形式 法蘭(FF RF RTJ)、焊接(SW BW)

閥蓋形式 高溫型+230～+450℃、超高溫型+230～+560℃

壓蓋型式 螺栓壓緊式

密封填料 金屬石墨纏繞墊片、柔性石墨、碳纖維填料

閥內件

閥芯形式 單座、籠式、套筒閥芯

流量特性 線性、等百分比

執行機構

執行器型號 V3810L系列、PSL系列

主要技術參數 電源電壓：220V/50Hz、輸入信號：4-20mA或1-5V·DC、輸出信號：4-20mA·DC

            防護等級：相當IP55、隔爆標志：ExdⅡBT4、手操功能：手柄

            環境溫度：-25～+70℃、環境濕度：≤95%

 

進口電動散熱調節閥產品簡介：

德國洛克《DE LOCKE》進口電動散熱調節閥調節機構采用平衡式閥塞結構，電子式電動高溫調節閥具有閥穩定性好，不易震動，噪音低，對溫度敏感性小，允許使用壓差不大、溫度較大等特點。進口電動散熱調節閥廣泛使用于高溫介質，流量大，溫度高，泄漏量要求不嚴格的場合。

主要產品有進口電動散熱調節閥，進口電動散熱三通調節閥，進口高溫散熱調節閥

Introduction of imported electric cooling control valve products:
Germany Locke "de Locke" imported electric cooling control valve regulating mechanism adopts balanced valve plug structure, electronic electric high temperature control valve has good valve stability, not easy to vibrate, low noise, low temperature sensitivity, small allowable pressure difference, large temperature and other characteristics. Imported electric cooling control valve is widely used in high temperature media, large flow, high temperature, leakage requirements are not strict occasions.
The main products are imported electric cooling control valve, imported electric cooling three-way control valve, imported high temperature cooling control valve
 

進口電動散熱調節閥售后服務承諾

1、服務宗旨：快速、果斷、準確、周到、徹底。

2、服務目標：服務質量贏得客戶滿意。

3、服務效率：保修期內或保修期外如設備出現故障，供方在接到通知后，如需現場解決的，派出專業技術服務人員，24小時內趕到現場（路途遙遠的48小時趕到），并做到問題不解決服務人員不撤離。

4、服務原則：產品保修期為十二個月，在保修期內供方將免費維修和更換屬質量原因造成的零部件損壞。保質期外零部件的損壞，德國洛克公司本著長期與客戶合作關系，提供的配件只收成本費，如需方人為因素造成的設備損壞，供方維修或提供的配件均按成本計價。

After sales service commitment of imported electric cooling control valve
1. Service tenet: fast, decisive, accurate, thoughtful and thorough.
2. Service goal: service quality to win customer satisfaction.
3. Service efficiency: in case of equipment failure within or outside the warranty period, the supplier shall send professional and technical service personnel to the site within 24 hours (48 hours if the problem is not solved) if it needs to be solved on site after receiving the notice.
4. Service principle: the product warranty period is 12 months. During the warranty period, the supplier will repair and replace the damaged parts caused by quality reasons free of charge. For the damage of spare parts beyond the warranty period, based on the long-term cooperative relationship with customers, German Locke company only charges the cost for the spare parts provided. If the equipment is damaged due to human factors of the demander, the spare parts repaired or provided by the supplier shall be priced according to the cost.