進口自力式壓力調節閥德國洛克品牌產品簡介

一、進口自力式壓力調節閥技術參數及性能：

二、進口自力式壓力調節閥主要特點：

1、進口自力式壓力調節閥無需外加能源，能在無電無氣的場合工作，既方便又節約能源。

2、壓力分段范圍細且互相交叉，調節精度高。

3、壓力設定值在運行期間可連續設定。

4、對閥后壓力調節，閥前壓力與閥后壓力之間比為10:1~10:8

5、橡膠膜片式檢測，執行機構檢測精度高、動作靈敏。

6、采用壓力平衡機構，使調節閥反應靈敏，控制精確。

二、 Main features of imported self operated pressure regulating valve:
1. The imported self operated pressure regulating valve does not need additional energy, and can work in the occasions without electricity and gas, which is convenient and energy-saving.
2. The pressure section range is fine and cross each other, and the adjustment precision is high.
3. The pressure setting can be set continuously during operation.
4. To adjust the pressure behind the valve, the ratio between the pressure before the valve and the pressure after the valve is 10:1 ~ 10:8
5. Rubber diaphragm type detection, high detection accuracy and sensitive action of actuator.
6. The pressure balance mechanism makes the regulating valve sensitive and accurate.

 

三、進口自力式壓力調節閥產品描述：

德國DE LOCKE洛克進口自力式壓力調節閥由閥體、閥座、閥芯部件等組成，是一種無需外來能源而只依靠被調介質自身的壓力變化進行自動調節壓力的節能型產品，引入執行機構控制閥芯位置，改變兩端的壓差和流量，使閥前（或閥后）壓力穩定。具有動作靈敏，密封性好，壓力設定點波動小等優點，廣泛應用于氣體、液體及蒸汽介質減壓穩壓或泄壓穩壓的自動控制。用于城市供熱、供暖系統及石油、化工、電力、冶金、食品、輕工等各種工業設備中氣體、液體、蒸汽等介質的減壓、泄閥，恒壓。

本產品有公稱壓力PN1.6、4.0MPa，公稱通徑范圍15～300mm，使用溫度≤350℃。多種多樣的品種可供選擇。 

三、 Product description of imported self operated pressure regulating valve:
German de lock imported self operated pressure regulating valve is composed of valve body, valve seat and valve core components. It is an energy-saving product that can automatically adjust the pressure only by the pressure change of the regulated medium without external energy. The actuator is introduced to control the position of valve core, change the pressure difference and flow at both ends, and stabilize the pressure in front of (or behind) the valve. It has the advantages of sensitive action, good sealing performance and small fluctuation of pressure set point. It is widely used in automatic control of pressure reduction and stabilization of gas, liquid and steam medium. It is used for pressure relief and relief valve of gas, liquid, steam and other media in urban heating, heating system and various industrial equipment such as petroleum, chemical, electric power, metallurgy, food, light industry, etc.
This product has nominal pressure of pn1.6, 4.0Mpa, nominal diameter range of 15 ~ 300mm, and service temperature ≤ 350 ℃. There are many varieties to choose from.