進口杠桿浮球式疏水閥德國洛克品牌產品中心

 

進口杠桿浮球式疏水閥結構特點:

1、采用軋裝閥機械，具有優良的密封性和耐久性。

2、平衡雙閥座設計，比一般的疏水閥體積小而排量大，特大排量場和更能發揮優越性。

3、杠桿浮球式疏水閥內裝雙金屬片空氣自動排放閥，可防止空氣氣堵和蒸汽汽鎖。

4、杠桿浮球式疏水閥采用獨特的U型雙金屬通氣口，可大大縮短設備起動時間。

5、全部部件安裝在閥蓋上，閥無需從配管上卸下，就可維修保養，簡單方便。

6、此超大排量型蒸汽疏水閥，在整個工作壓力范圍內無需調整和更換內件，即可充分排除大量的疑結水。排水過冷度可達0℃，特別適合用于疑結水量大的工作場合。

進口杠桿浮球式疏水閥規格參數：

1.規格范圍：DN15-DN100

2溫度范圍：-20℃≈350℃

3.壓力范圍：PN16-PN40

4.閥體材質：鑄鋼/不銹鋼/鉻鉬鋼

5.閥蓋材質：鑄鋼/不銹鋼/鉻鉬鋼

6.連接方式：法蘭，內螺紋連接

7.應用場合：水、水蒸汽

Specifications and parameters of imported lever floating ball trap:
1. Specification range: DN 15-dn 100
2. Temperature range: - 20 ℃ ~ 350 ℃
3. Pressure range: pn16-pn40
4. Valve body material: cast steel / stainless steel / chrome molybdenum steel
5. Valve cover material: cast steel / stainless steel / chrome molybdenum steel
6. Connection mode: flange, internal thread connection
7. Application: water and steam
 

進口杠桿浮球式疏水閥產品簡介:

德國洛克《DE LOCKE》進口杠桿浮球式疏水閥，Lever ball float type steam trap，也叫杠桿式疏水器，杠桿式蒸汽疏水閥，杠桿式蒸汽疏水閥，杠桿式蒸汽疏水器，原理與自由浮球式基本相同，內部結構是浮球連接杠桿帶動閥心，隨凝結水的液位升降進行開關閥門的疏水閥。杠桿浮球式疏水閥利用雙閥座增加凝結水排量，可達到體積小排量大，*疏水量達100噸/小時，是大型加熱設備*的疏水閥

杠桿浮球式疏水閥啟動時自動排空氣裝置迅速排除系統中不凝結氣體，當蒸汽和熱冷凝結水進入后，閥腔內溫度隨著升高，排空氣裝置自動關閉，浮球根據冷凝結水水位的變化而作升降，帶動杠桿調節閥座孔的開度，連續排放凝結水。當凝結水停止進入時，浮球靠自重下降，驅使杠桿帶動閥芯關閉排水閥座孔。

Introduction of imported lever floating ball trap products:
Lever ball float type steam trap, also known as lever type steam trap, lever type steam trap, lever type steam trap and lever type steam trap, imported from German Locke "de Locke", has the same principle as free floating ball type. The internal structure of the trap is that the float ball is connected with the lever to drive the valve core, and the valve is opened and closed with the rise and fall of condensate level. The lever floating ball trap uses double seats to increase the condensate displacement, which can achieve small volume and large displacement, with the maximum drainage capacity of 100 t / h. It is the most ideal trap for large heating equipment
When the lever floating ball steam trap is started, the automatic air exhaust device quickly removes the non condensable gas in the system. When the steam and hot condensed water enter, the temperature in the valve chamber increases, and the air exhaust device automatically closes. The floating ball rises and falls according to the change of condensed water level, which drives the lever to adjust the opening of valve seat hole and continuously discharges condensed water. When the condensate stops entering, the floating ball will drop by its own weight and drive the lever to drive the valve core to close the drain valve seat hole.
 

進口杠桿浮球式疏水閥安裝方式：

1、在安裝疏水閥之前一定要用帶壓蒸汽吹掃管道，清除管道中的雜物。

2、疏水閥前應安裝過濾器，確保疏水閥不受管道雜物的堵塞，定期清理過濾器。

3、疏水閥前后要安裝閥門，方便疏水閥隨時撿修。

4、凝結水流向要與疏水閥安裝箭頭標志一致。

5、疏水閥應安裝在設備出口的處，及時排出凝結水，避免管道產生汽阻。

6、如果設備的處沒有位置安裝疏水閥，應在出水口位置加個反水彎（凝結水提升接頭），把凝結水位提升后再裝疏水閥，以免產生汽阻。

Installation method of imported lever floating ball trap:
1. Before installing the steam trap, it is necessary to purge the pipeline with pressurized steam to remove the impurities in the pipeline.
2. A filter shall be installed before the drain valve to ensure that the drain valve is not blocked by pipe debris, and the filter shall be cleaned regularly.
3. The valve should be installed before and after the trap to facilitate the repair of the trap at any time.
4. The direction of condensate flow shall be consistent with the installation arrow mark of steam trap.
5. The steam trap shall be installed at the outlet of the equipment to discharge the condensate in time to avoid steam resistance in the pipeline.
6. If there is no drain valve installed at the outlet of the equipment, a reverse water bend (condensate lifting joint) should be added at the outlet to raise the condensate level before installing the drain valve to avoid steam resistance.
 

進口杠桿浮球式疏水閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術部為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!