斜板沉淀器，根據進出水的水流方向，主要分為三類：同向流(下向流)斜板沉淀池、異向流(上向流)斜板沉淀池、側向流斜板沉淀池。使用最廣泛的是異向流(上向流)斜板沉淀器，水流從斜管沉淀池的斜板填料下部進水，水中的顆粒沉淀在斜板上，并順著傾斜的斜板向下滑入泥斗，分離后的清水自設備上部的集水裝置排出斜板沉淀器。Inclined plate settlers, according to the direction of water flow in and out of the water, are mainly divided into three categories: co-flow (downward flow) sloping plate sedimentation tank, non-directional flow (upward flow) sloping plate sedimentation tank, lateral flow sloping plate sedimentation Pool. The most widely used is the counter-flow (upward flow) inclined plate settler. Water flows from the lower part of the inclined plate filler of the inclined tube sedimentation tank. The particles in the water settle on the inclined plate and slide down along the inclined plate. Into the mud bucket, the separated clean water is discharged from the inclined plate settler from the water collecting device on the upper part of the equipment.

    多功能高效組合斜板填料由乙丙共聚斜板片和斜板支撐桿兩部分組合而成，材質均為乙丙共聚，通過斜板支撐桿的前后串連將斜板片組合成水處理工藝中常用的斜板設備。多功能高效組合斜板填料具有安裝拆解方便，斜板間距可調，連接長度不限、整體強度高、耐腐蝕等優點。The multifunctional and efficient combined inclined plate packing is composed of two parts of the ethylene-propylene copolymer inclined plate and the inclined plate support rod. The materials are all ethylene-propylene copolymer. The inclined plate is combined into a water treatment process through the front and rear serial connection of the inclined plate support rod. Inclined plate equipment commonly used in China. The multifunctional and efficient combined inclined plate packing has the advantages of convenient installation and disassembly, adjustable inclined plate spacing, unlimited connection length, high overall strength, and corrosion resistance.

    斜板支撐桿可設計多種規格尺寸，根據不同的斜板參數要求進行配套，可實現不同的斜板間距、角度等要求。多功能高效組合斜板填料內部水流流道通暢，不易積泥夾泥，上向流沉淀池和側向流沉淀池均可應用，因此適用于各種水處理工藝，其強度高、耐腐蝕、可拆解的特性使其與傳統斜板相比使用壽命延長。Inclined plate support rods can be designed in a variety of specifications and sizes, and matched according to different inclined plate parameter requirements, which can achieve different inclined plate spacing and angle requirements. The internal water flow channel of the multifunctional and efficient combined inclined plate packing is unobstructed, and it is not easy to accumulate mud and mud. Both upflow sedimentation tank and lateral flow sedimentation tank can be applied. Therefore, it is suitable for various water treatment processes with high strength, corrosion resistance, and The detachable feature makes it have a longer service life compared with traditional inclined plates.多功能高效組合斜板填料組裝前先在斜板片上開若干小孔，后將斜板支撐桿連接頭穿過小孔與另一個支撐桿的連接楔尾用力楔合，使兩個支撐桿與斜板片緊固成一個整體，重復這一步驟即可將多個斜板片串聯成一個整體，整個安裝過程不需任何機械加工設備、安裝極其簡便。Before assembling the multifunctional high-efficiency combination inclined plate packing, open a number of small holes in the inclined plate, and then insert the connecting head of the inclined plate support rod through the small hole and strongly wedge the connecting wedge tail of the other support rod to make the two support rods and The inclined plates are fastened into a whole, and multiple inclined plates can be connected in series to form a whole by repeating this step. The whole installation process does not require any mechanical processing equipment, and the installation is extremely simple.

    斜板填料焊接安裝工藝的好壞直接決定了它的使用周期。下面給大家簡述下斜板填料的焊接方法。

    1.斜板填料焊接前，需要找到合適的工作平臺。然后首先確定平板之間的工字肋條的數量。假如工字肋條為7條，就要在平板上面平均布置。一般平板長寬均為1000mm，那么7條肋條的間距應該為1000/8=125mm。確定好規定的間距距離后就可以進行工字肋條焊接事宜。Before welding the inclined plate filler, it is necessary to find a suitable working platform. Then first determine the number of I-ribs between the plates. If there are 7 I-shaped ribs, they must be evenly arranged on the plate. Generally, the length and width of the plate are 1000mm, so the spacing of the 7 ribs should be 1000/8=125mm. After determining the specified spacing distance, I-rib welding can be carried out.

    2.焊接電烙鐵的使用。焊接斜板填料應使用標準3尖頭烙鐵頭，待電烙鐵加熱到工作溫度后。以工字肋條和平板垂直接觸的位置，沿45度角度進行插入焊接，需要注意的是烙鐵頭必須扎透工字條下部與平板連接處，這樣可以保證兩者牢固的粘接在一起，單條肋條焊接點不少于12處且均勻分布。The use of soldering iron. Welding inclined plate filler should use a standard 3-point soldering iron tip, after the electric soldering iron is heated to the working temperature. Insert the welding at the position where the I-shaped rib and the plate are in vertical contact with a 45-degree angle. It should be noted that the soldering iron tip must penetrate the lower part of the I-shaped bar and the connection of the plate to ensure that the two are firmly bonded together. A single rib There are no less than 12 welding points and evenly distributed.

   3.焊接成型的單組斜板填料，要有序擺放于空地。然后依次放入池中，單組斜板進行最后的整體連接焊接，并做穩定加固處理。陰陽角的處理方法與蜂窩斜管填料一致。整體安裝需要注意時刻調整間距和平整度，保證做出來的整齊牢固。The welded single set of inclined plate fillers should be placed in an orderly manner in the open space. Then they are put into the pool one by one, and the single group of inclined plates are welded for the final integral connection and stabilized and reinforced. The treatment method of the yin and yang angle is the same as that of the honeycomb inclined tube packing. The overall installation needs to pay attention to adjusting the spacing and flatness at all times to ensure that it is neat and firm.