進口蒸汽電動調節閥產品特點-德國洛克

一、進口蒸汽電動調節閥要技術參數： 

進口蒸汽電動調節閥主要特點：

1、進口蒸汽電動調節閥無需外加能源能在無電無氣的場所工作既方便又節約了能源。

2、壓力分段范圍細且互相交叉，調節精度高。

3、壓力設定值在運行期間可連續設定。

4、對閥后壓力調節，閥前壓力與閥后壓力之比可為10：1～10：8。

5、橡膠膜片式檢測，執行機構測精度高、動作靈敏。

6、采用壓力平衡機構，使調節閥反應靈敏、控制精確。

Main features of imported steam electric control valve:
1. The imported steam electric control valve can work in the place without electricity and gas without additional energy, which is convenient and energy-saving.
2. The pressure section range is fine and cross each other, and the adjustment precision is high.
3. The pressure setting can be set continuously during operation.
4. To adjust the pressure behind the valve, the ratio of the pressure in front of the valve to the pressure behind the valve can be 10:1-10:8.
5. Rubber diaphragm type detection, high precision and sensitive action of actuator.
6. The pressure balance mechanism makes the control valve sensitive and accurate.
 

進口蒸汽電動調節閥描述：

德國DE LOCKE洛克進口蒸汽電動調節閥,是由直行程全電子式電動執行機構和頂導向式直通低流阻單座閥組成.具有結構緊湊,重量輕,動作靈敏,流體通道呈S流線型,壓降損失小,閥  容量大,流量特性精確,直接接受調節儀表輸入的（4-20mA DC 0-10mA DC或  1-5V DC）等控制信號及單相電源即可控制運轉,實現對工藝管路流體介質的自動調節控制,廣泛應用于精確控氣體,液體,蒸汽等介質的工藝參數如壓力,流量,溫度,液位等參數保持在給定值.是符合IEC標準的新一代通用調節閥產品.

Description: electric steam control valve inlet:
The steam electric control valve imported from Germany is composed of a straight stroke full electronic electric actuator and a top guide straight through low flow resistance single seat valve. It has the advantages of compact structure, light weight, sensitive action, s-streamline flow passage, small pressure drop loss, large valve capacity and accurate flow characteristics, It can directly receive the control signal (4-20mA DC, 0-10mA DC or 1-5V DC) from the regulating instrument and single-phase power supply to control the operation. It can realize the automatic regulation and control of the fluid medium in the process pipeline. It is widely used to accurately control the process parameters of gas, liquid, steam and other media, such as pressure, flow and temperature, The liquid level and other parameters are kept at the given values. It is a new generation of general control valve products in line with IEC standards