進口電動襯氟調節閥產品詳情-德國洛克

 

一、進口電動襯氟調節閥特點：

1．耐腐蝕：閥體內腔、閥芯、閥座、閥桿均316不銹鋼，能耐酸、堿，耐強腐蝕。

2．密封性能好：采用聚四乙烯材質的波紋管和填料雙重密封，確保無滲漏。

3．泄漏量?。河捎陂y芯、閥座是軟密封，故泄漏量低于國家IV級標準。

4．采用輕小型電動執行機構，體積小，重量輕，調節精度高。

 

二、進口電動襯氟調節閥技術參數：

公稱通徑mm 20-300mm

閥座直徑mm 10-300mm

公稱壓力MPa 0.6、1.0、1.6、2.5Mpa

行程 mm         10 16  25  40 60  100

工作溫度℃ -30℃~+150℃

流量特性 直線、等百分比

作用方式 電開式(K常開)；電關式(B)

固有可調比R 30：1

信號范圍Pr 0~10Madc；4~20mmADC

供電電源 220V 50~60HZ

防爆等級 普通型、防爆型

泄漏等級 VI

 

性能指標：

項目                 技術性能指標

基本誤差%             ≤±5

回差%                 ≤3

死區%                 ≤5

泄漏量                 ≤ 0.01%閥額定容量

額定流量系數誤差%     ≤±10；當KV≤6.3時，為≤±15 

 

零件材質：

零件名稱     材料

閥體、閥蓋     HT200、ZG230~450、ZG1Cr18Ni9Ti

襯里材料     F46、F4、F3、PO、PE、X、X3、PFA

閥芯         1Cr18Ni9Ti

波紋管         F4

填料         聚四氟乙烯、柔性石墨

彈簧         60Si2Mn

膜蓋         A3

閥桿、推桿     2Cr13/1Cr18Ni9Ti

襯套         2Cr13

2、 Technical parameters of imported electric fluorine lined control valve:
Nominal diameter mm 20-300 mm
Valve seat diameter mm 10-300 mm
Nominal pressure MPa ＜ 0.6, 1.0, 1.6, 2.5MPa
Stroke mm 10 16 25 40 60 100
Working temperature: ℃ - 30 ℃ ~ + 150 ℃
Flow characteristics straight line, equal percentage
Mode of action: electric open (k normally open); electric close (b)
Inherent adjustable ratio R ﹥ 30:1
The signal range is pr 0 ~ 10madc, 4 ~ 20mADC
Power supply: 220 V, 50 ~ 60 Hz
Explosion proof grade: ordinary type, explosion-proof type
Leakage class VI
Performance index:
Technical performance index of the project
Basic error% ≤± 5
Return difference% ≤ 3
Dead zone% ≤ 5
Leakage ≤ 0.01% of valve rated capacity
Rated flow coefficient error% ≤± 10; when kV ≤ 6.3, it is ≤± 15
Part material:
Part name material
Valve body, valve cover ﹣ HT200, zg230 ~ 450, zg1cr18ni9ti
Lining material: F46, F4, F3, Po, PE, x, X3, PFA
Valve core 1Cr18Ni9Ti
Bellows F4
Filler: PTFE, flexible graphite
Spring 60Si2Mn
Diaphragm cap A3
Stem, push rod, ~ 2Cr13 / 1Cr18Ni9Ti
Bushing 2C R13

三、進口電動襯氟調節閥描述：

德國《DE LOCKE》洛克進口電動襯氟調節閥主要是由電動執行機構和調節閥閥體兩部分組成。電動執行機構和其它電動調節閥配用的相同，都是接收控制器發來的4-20ma等模擬信號，控制閥門的開度，以達到調節管道介質流量、壓力等參數的目的。耐腐蝕電動襯氟調節閥和其它普通電動調節閥區別在于閥體，有的管道輸送如硫酸、王水等強腐蝕性的介質，因?yàn)楦g性太強，普通金屬材質的調節閥無法用于這種工況。而電動襯氟調節閥與流體接觸的閥體內壁和閥內組件均采用高壓注塑工藝，襯有能耐腐蝕、耐老化的聚全氟乙丙烯（F46），又采用聚四氟乙烯波紋管密封。解決了金屬閥門無法用在強腐蝕介質的工況。廣泛的應用于強腐蝕介質的工況管道。

3、 Description of imported electric fluorine lined regulating valve:
The electric fluorine lined regulating valve imported by de lock in Germany is mainly composed of two parts: electric actuator and regulating valve body. The same as other electric control valves, the electric actuator receives the analog signals from the controller, such as 4-20mA, to control the opening of the valve, so as to regulate the parameters of the medium flow and pressure of the pipeline. The difference between corrosion resistant electric fluorine lined regulating valve and other ordinary electric regulating valve lies in valve body. Some pipelines transmit strong corrosive medium such as sulfuric acid and wangshui. Because of its strong corrosion, the regulating valve of common metal cannot be used in this condition. The inner wall and components of valve body contacting with fluid of electric fluorine lined regulating valve are all made of high pressure injection molding process, which is lined with corrosion-resistant and aging resistant poly (perfluoroethylene) (F46), and polytetrafluoroethylene bellows. The working condition that metal valve can not be used in strong corrosion medium is solved. It is widely used in the working condition pipeline of strong corrosion medium.
 

四、進口電動襯氟調節閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!