優質高速隔離帶模具 水泥隔離帶模具 廠家推薦

高速隔離帶模具標準件是根據中國模具標準化體系包括四大類標準,即:模具基礎標準、模具工藝質量標準、模具零部件標準及與模具生產相關的技術標準生產的模具成型產品.按模具主要分類分沖壓模具標準、塑料注射模具標準、壓鑄模具標準、鍛造模具標準、緊固件冷鐓模具標準、拉絲模具標準、冷擠壓模具標準、橡膠模具標準、玻璃制品模具和汽車沖模標準等十大類.模具標準件國內也有一些企業生產,但品種規格少,使用覆蓋率低.熱流道元件國內尚無標準,只有個別企業生產供應或自產自用.目前中高檔熱流道元件基本都從國外進口,自產自用的都是一些性能較低和穩定性較差的產品,用於要求不太高的模具上.還有許多模具標準件國外已可從市場上購到,而國內尚無專業生產,因此在發展品種規格方面,前景十分廣闊.

The standard parts of high-speed isolation belt mould are based on four kinds of standards in China mould standardization system, That is: basic standard of mould, process quality standard of mould, parts standard of mould and technical standard related to mould production. According to the main classification of mould, it can be divided into stamping mould standard, plastic injection mould standard, die-casting mould standard, forging mould standard, fastener cold heading mould standard, drawing mould standard, cold extrusion mould standard and rubber mould standard There are ten kinds of standards for glass products mould and automobile stamping die. There are also some domestic enterprises that produce mould standard parts, but the varieties and specifications are few, and the use coverage rate is low. There is no domestic standard for hot runner components, only some enterprises produce and supply or use them by themselves. At present, middle and high-grade hot runner components are basically imported from abroad, and the products produced and used by themselves are all products with low performance and poor stability, There are many standard parts of mould that can be purchased from the market abroad, but there is no professional production in China, so the prospect of developing varieties and specifications is very broad

高速隔離帶模具加工制作最大的難度和挑戰是怎么削減磨損.畢竟,磨損得越兇猛,模具的修理費用越高,模具壽數越短.因而關于模具規劃者和制造者來說,削減磨損是其重要方針之一,可是這又是一個難以克服的難題,尤其是模具在進行成型生產時會有各種不確定的狀況出現.對于磨損的隔離墩模具,規劃者和制造者試圖運用一些典型的辦法以削減磨損,如運用不一樣的金屬材料,運用低磨損的涂層,指定高硬度的金屬材料,合模的規劃要增大視點以防止合模鎖死,以及更多根據經歷的辦法.但是,不能夠被規劃者和隔離墩模具制造者最好了解的一種規劃原則是:由成型過程中的一些負載和應力導致的模具零部件磨損,也應該被消除.

How to reduce wear is the biggest difficulty and challenge in the manufacturing of high-speed isolation belt mold. After all, the fiercer the wear is, the higher the repair cost of the mold is, and the shorter the life of the mold is. Therefore, for the mold planners and manufacturers, reducing wear is one of their important policies, but it is also a difficult problem to overcome, In particular, there will be various uncertain situations when the mold is in the molding production. For the worn isolation pier mold, planners and manufacturers try to use some typical methods to reduce the wear, such as using different metal materials, using low wear coating, specifying high hardness metal materials, and increasing the point of view to prevent the mold from locking, However, one of the best planning principles that can not be understood by planners and mold makers of isolation piers is that the wear of mold parts caused by some loads and stresses during the forming process should also be eliminated