聯軸器類型:常用的精密聯軸器有：彈性聯軸器，膜片聯軸器，波紋管聯軸器，滑塊聯軸器，梅花聯軸器，剛性聯軸器。

歡迎各界同仁來人來電咨詢、洽談!詳細資料至公司索取。

      企業官網：www.senpull.cn      國內熱線：400-6969-728      技術咨詢：021-51602627      

    【進口設備國際亞洲配送中心】【中國機械備品備件營銷中心】

聯軸器特點1、彈性聯軸器(1)一體成型的金屬彈性體；(2)零回轉間隙、可同步運轉；(3)彈性作用補償徑向、角向和軸向偏差；
(4)高扭矩剛性和卓越的靈敏度；(5)順時針和逆時針回轉特性完全相同；(6)免維護、抗油和耐腐蝕性；
(7)有鋁合金和不銹鋼材料供選擇；(8)固定方式主要有頂絲和夾緊兩種。
2、膜片聯軸器(1)高剛性、高轉矩、低慣性；(2)采用環形或方形彈性不銹剛片變形；(3)大扭矩承載，高扭矩剛性和卓越的靈敏度；
(4)零回轉間隙、順時針和逆時針回轉特性相同；(5)免維護、超強抗油和耐腐蝕性；
(6)雙不銹鋼膜片可補償徑向、角向、軸向偏差，單膜片則不能補償徑向偏差。
3、波紋管聯軸器(1)無齒隙、扭向剛性、連接可靠、耐腐蝕性、耐高溫；(2)免維護、超強抗油，波紋管形結構補償徑向、角向和軸向偏差，偏差存在的情況下也可保持等速作動；(3)順時針和逆進針回轉特性完全相同；(4)波紋管材質有磷青銅和不銹鋼供選擇；
(5)可適合用于精度和穩定性要求較高的系統。
4、滑塊聯軸器(1)無齒隙的連接，用于小扭矩的測量傳動結構簡單；(2)使用方便、容易安裝、節省時間、尺寸范圍廣、轉動慣量小，便于目測檢查；(3)抗油腐蝕，可電氣絕緣，可供不同材料的滑塊彈性體選擇；
(4)軸套和中間件之間的滑動能容許大徑向和角向偏差，中間件的特殊凸點設計產生支撐的作用，容許較大的角度偏差，不產生彎曲力矩，侃軸心負荷降至最低。
5、梅花聯軸器(1)緊湊型、無齒隙，提供三種不同硬度彈性體；(2)可吸收振動，補償徑向和角向偏差；(3)結構簡單、方便維修、便于檢查；
(4)免維護、抗油及電氣絕緣、工作溫度20℃-60℃；(5)梅花彈性體有四瓣、六瓣、八瓣和十瓣；(6)固定方式有頂絲，夾緊，鍵槽固定。
6、剛性聯軸器(1)重量輕，超低慣性和高靈敏度；(2)免維護，超強抗油和耐腐蝕性；(3)無法容許偏心，使用時應讓軸盡量外露；
(4)主體材質可選鋁合金/不銹鋼；(5)固定方式有夾緊、頂絲固定。
聯軸器是用來聯接不同機構中的兩根軸（主動軸和從動軸）使之共同旋轉以傳遞扭矩的機械零件。在高速重載的動力傳動中，有些聯軸器還有緩沖、減振和提高軸系動態性能的作用。
聯軸器主要通過預緊來達到無空回傳遞扭矩，軸連接無空回，好的柔韌性和抗沖擊性，允許各個方向的偏移，即使在高速下，運動也平穩，能承受大的工作量， 安裝操作簡單方便，免維護，不需停工期，能承受高溫環境，小尺寸，小慣量，電絕緣，性價比高，額定扭矩 0.10-650 Nm 。

聯軸器由兩半部分組成，分別與主動軸和從動軸聯接。一般動力機大都借助于聯軸器與工作機相聯接。
聯軸器種類繁多，按照被聯接兩軸的相對位置和位置的變動情況，可以分為：
①固定式聯軸器。主要用于兩軸要求嚴格對中并在工作中不發生相對位移的地方，結構一般較簡單，容易制造，且兩軸瞬時轉速相同，主要有凸緣聯軸器、套筒聯軸器、夾殼聯軸器等。
②可移式聯軸器。主要用于兩軸有偏斜或在工作中有相對位移的地方，根據補償位移的方法又可分為剛性可移式聯軸器和彈性可移式聯軸器。
剛性可移式聯軸器利用聯軸器工作零件間構成的動聯接具有某一方向或幾個方向的活動度來補償，如牙嵌聯軸器（允許軸向位移）、十字溝槽聯軸器（用來聯接平行位移或角位移很小的兩根軸）、萬向聯軸器（用于兩軸有較大偏斜角或在工作中有較大角位移的地方）、齒輪聯軸器（允許綜合位移）、鏈條聯軸器（允許有徑向位移）等。
彈性可移式聯軸器（簡稱彈性聯軸器）利用彈性元件的彈性變形來補償兩軸的偏斜和位移，同時彈性元件也具有緩沖和減振性能，如蛇形彈簧聯軸器、徑向多層板簧聯軸器、彈性圈栓銷聯軸器、尼龍栓銷聯軸器、橡膠套筒聯軸器等。

Coupling type

Commonly used precision couplings are: the elastic coupling, diaphragm couplings, bellows couplings, oldham coupling, plum coupling, rigid coupling.

Welcome colleagues from all walks of life come to inquire, negotiate! Detailed information to company to claim. We will be first-class products, low prices, high quality service in close cooperation with you and seek common development!

Corporate website: www.senpull.cn China hotline: 400-6969-728 technical consultation: 021-51602627   51602681

【 imported compressor international Asia distribution center 】 【 Chinese air compressor spare parts marketing center】

Coupling characteristics

1, the elastic coupling

(1) metal unibody elastomer;

(2) rotary zero clearance, synchronous operation;

(3) the elastic function to compensate the radial, angular and axial deviation;

(4) high torque stiffness and excellent sensitivity;

(5) exactly the same clockwise and counterclockwise rotary characteristics;

(6) is a maintenance free, oil resistance, and corrosion resistance;

(7) of aluminum alloy and stainless steel materials to choose from;

(8) fixed way mainly covered yarn and clamping the two.

2, diaphragm coupling

(1) high rigidity, high torque and low inertia;

(2) adopting the circular or square stainless just slice deformation;

(3) high torque load, high torque stiffness and excellent sensitivity;

(4) zero rotation clearance, clockwise and counterclockwise rotary characteristics;

(5) is a maintenance free, super oil resistance and corrosion resistance;

(6) double stainless steel diaphragm can compensate radial, angular and axial deviation, single diaphragm cannot compensate radial deviation.

3, bellows couplings

(1) no backlash, twist to the rigid, reliable connection, corrosion resistance, high temperature resistant;

(2) is a maintenance free, strong resistance to oil, corrugated tube structure of the compensation Angle to the radial, and axial deviation, deviation in the presence of also can keep the constant actuation;

(3) and inverse clockwise needle into rotary characteristics are identical;

(4) the material is phosphor bronze and stainless steel bellows for choice;

(5) can be used for the high system accuracy and stability requirements.

4, the oldham coupling

(1) no backlash connection, for small torque measuring transmission structure is simple;

(2) easy to use, easy to install, save time, wide range of size, moment of inertia of small, easy to visual inspection;

(3) oil resistance, electric insulation, for different slider elastomer material to choose;

Slide (4) between the bushing and middleware can allow large radial and angular deviation, special protruding point design middleware supporting role, allowing larger angular deviation, does not produce bending moment, kan axial load to a minimum.

5, plum coupling

(1) compact, no backlash, provides three different hardness of the elastomer;

(2) can absorb vibration, to compensate the radial and angular deviation;

(3) simple structure, convenient maintenance, easy to check;

(4) is a maintenance free, oil resistance and electrical insulation, the working temperature of 20 ℃ to 60 ℃;

(5) the plum blossom four disc elastomer, six petals, eight disc and disc;

(6) fixed way covered wire, clamping, keyway is fixed.

6, rigid couplings

(1) light weight, low inertia and high sensitivity;

(2) is a maintenance free, strong oil resistance and corrosion resistance;

(3) not allow eccentric, when using, should let shaft exposed as far as possible;

(4) optional subject material aluminum alloy/stainless steel;

(5) fixed way clamp, with the top wire fixation.

Coupling is used to join different organizations in the two axis (driving shaft and driven shaft) to rotate together to transfer torque of mechanical parts. The overloaded power transmission at high speed, some coupling still buffering, vibration and enhance the role of shaft system dynamic performance.

Coupling by preloaded to reach the sky back to the main torque and shaft connection has no empty return, good flexibility and impact resistance, allowing all directions of offset, even at high speed, smooth movement, can withstand the big workload, operation simple and convenient installation, free maintenance, do not need downtime, can withstand the high temperature environment, small size, small inertia, electrical insulation, high cost performance, the rated torque of 0.10-650 - Nm.

coupling

Coupling consists of two parts, each with the driving shaft and driven shaft connection. Most general engine by means of coupling machine connected with work.

Coupling variety, according to the linked two axis of the relative position and location changes, can be divided into:

1) type coupling. Is mainly used in the two axis in a strict and does not occur relative displacement in the work place, usually simpler in structure, easy manufacture, and two axis instantaneous speed is the same, mainly has coupling, sleeve coupling, flange coupling clamp shell, etc.

(2) portable coupling. Mainly used in the two axis deflection or relative displacement in the work place, according to the method to compensate the displacement and can be divided into movable type coupling rigid and elastic movable type coupling.

Rigid coupling using movable type between the working parts of the coupling structure of fixed connection with a certain direction or some activity degree of direction to compensate for, such as tooth coupling grooves () allows the axial displacement, cross coupling (used to join two axis parallel displacement or angular displacement is very small), universal shaft coupling (for two axis have a larger of declination or at work have a larger angular displacement), gear coupling (allowing integrated displacement), chain couplings (radial displacement is allowed).

Elastic portable coupling (hereinafter referred to as elastic coupling) USES the elastic deformation of elastic element to compensate for the two shaft deflection and displacement of elastic element at the same time also has the buffering and damping performance, such as snake-like spring coupling, radial multi-layer plate spring coupling, flexible pin coupling sleeve, nylon pin coupling, rubber coupling, etc.