預制步行板模具主要是在鐵路建設上使用的，預制步行板模具一般有三種，除了常用的平石外，還有鵝卵石、圓點花紋兩種，其尺寸比較固定，厚度均為8公分，寬度在38、24、33厘米中選擇，而長度在158、138、118、98厘米中選擇，這就是步行板預制塊的標準尺寸。步行板也可以稱之為步道板，主要在鐵路站臺兩側使用，一般使用起到防滑效果的較多，這樣可以顧及上下車的乘客腳下的安全性。步行板的生產基本上都是備有現貨的，因為這種模具需求的數量不是很多，加上尺寸固定，所以有現貨。預制步行板模具的主要特點是根據在規格選擇上以及模具的訂購上，預制步行板模具是在鐵路站臺使用，除了平石外，還有鵝卵石花紋或者菱形花紋的，具體選擇歸屬于各個工程項目部。預制步行板模具廠家介紹是按照自己已有的模具或者其他歸類的模板進行的總結，常規使用的步行板寬度在38或者24厘米選擇，而厚度基本上在7-8公分，長度的選擇比較多，除了158 148 138 118 98厘米外， 還有其他類型的需要選擇。步行板的制作非常簡單，除了必要的模具外，混凝土、振動臺、人工就可以進行預制塊的生產工作了。The prefabricated walking board mold is mainly used in railway construction. There are generally three kinds of prefabricated walking board mold. In addition to the common flat stone, there are two kinds of pebbles and dot patterns. The size is relatively fixed, the thickness is 8 cm, the width is 38, 24, 33 cm, and the length is 158, 138, 118, 98 cm, which is the standard size of the prefabricated walking board. The walking board can also be called the footpath board, which is mainly used on both sides of the railway platform. Generally, it plays a more antiskid effect, which can take into account the safety of the foot of the passengers getting on and off the train. Walking board production is basically ready to stock, because the number of demand for this kind of mold is not a lot, plus the size of fixed, so there are spot. The main feature of the prefabricated walking board mold is that according to the specification selection and mold ordering, the prefabricated walking board mold is used in the railway platform. In addition to the flat stone, there are pebble patterns or diamond patterns. The specific selection belongs to each project department. The introduction of prefabricated walking board mold manufacturers is a summary based on their existing molds or other classified templates. The width of the commonly used walking board is 38 or 24 cm, while the thickness is basically 7-8 cm. There are many choices for the length. In addition to 158148 138 118 98 cm, there are other types of need to be selected. The manufacture of walking board is very simple. In addition to the necessary mold, the concrete, vibration table and manual can carry out the production of prefabricated block.