熱壓聚乙烯扁平膠帶：

• CM3：紅色米：每厘米有標記。
• 長度： 30m、60m 和 100m
• 每厘米熱壓標記
  

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

Solinst 101B Water Level Meters feature a basic design, making them a very economical option for depth to water level measurements. The 101B uses polyethylene flat tape, heat embossed in centimeter increments. Tape lengths available are 30 m, 60 m, and 100m. The robust stainless steel P1 Probe is ?" (12.7 mm) in diameter.

Bladder Pumps for Groundwater Samples：

Once you've measured your water level, take a groundwater sample using a Solinst Bladder Pump. Bladder Pumps ensure no air/water contact during operation, providing representative groundwater samples and excellent VOC sample results.

The Solinst Model 101B Water Level Meter is designed to be an economical and basic, yet durable instrument to measure groundwater levels. It is ideal for measuring depth to water in wells, boreholes, standpipes, and tanks.

Also available from Solinst, are the Standard Model 101 Water Level Meters that feature a laser marked PVDF flat tape, and the Model 102 Coaxial Cable Water Level Meters. Both options allow shut-off and sensitivity adjustment (See Model 101 Water Level Meter and 102 Water Level Indicator Data Sheets).

Water Level Meter Operating Principles：

The Model 101B Water Level Meter uses a solid stainless steel probe, connected to durable polyethylene flat tape. A standard 9 volt battery, housed inside the reel hub, powers the Water Level Meter. The electronics are coated for water resistance.

When the probe enters water, the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

Sturdy Reel and Handle：

The Model 101B Water Level Meter has a sturdy frame and ergonomic handle for winding the tape. A brake is also included on the reel.

For convenience, there is also a probe holder on the front of the faceplate.

Robust, Accurate Probe：

The Model 101B P1 Probe is made from durable stainless steel. It is designed to reduce false signals in cascading water, and is leak-proof.

Size: 12.7 mm wide, 102 mm long (1/2" x 4")

Effective Diameter: 16.5 mm (5/8")

Weight: 100 grams (3.53 ounces)

Heat Embossed Polyethylene Flat Tape：

The Model 101B Water Level Meter uses high quality polyethylene flat tape with accurate heat embossed markings every centimeter and meter.

The 10 mm (3/8") wide tape reels smoothly, remains flexible, hangs straight in the well and is available in 30 m, 60 m, and 100 m lengths.

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. The tape is very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

CM3: Meters in red: with markings every centimeter.

Lengths: 30m, 60m and 100m

Heat Embossed Markings Each Centimeter