中文內(nèi)容來自機器翻譯,內(nèi)容僅供參考,實際內(nèi)容可參考原廠介紹或以合同為準。
英文原文:
The Point Source Bailer is stainless steel and has dual ball valves, top and bottom. This prevents a sample collected at a discrete depth from mixing with water from other depths during retrieval. It is a simple and cost effective device for aquifer profiling, and collecting samples from distinct levels. Purging and disposal of purge water can be avoided. The miniature 0.5" (12.7 mm) diameter model is ideal for use in narrow tubes and direct-push devices.
Easy to transport and use
Ideal for aquifer profiling
Discrete zone groundwater sampler
Point source sampling is ideal for obtaining high quality, representative samples of groundwater from specific depths. It allows the collection of water that has just flowed into a well at the desired sampling point. This can avoid purging and disposal of purged water.
The Point Source Bailer can be used to profile an open borehole or screened well, collecting samples from distinct levels or points of inflow. Sample biases due to mixing of the sample with water from different levels in the well is minimized.
Method of Operation:
The Point Source Bailer is lowered slowly to the desired sample depth on a support line. As the bailer is being lowered, both ball valves open, allowing water to flow through the sampler.
On reaching the sampling depth, the bailer is raised slowly and steadily. The weight of water and upward movement of the bailer keep both ball valves closed. The top ball valve prevents the sample in the bailer from mixing with water at higher levels in the borehole. The bottom valve prevents the sample from leaking out of the bailer.
Once at the surface, the bailer is emptied by opening the top vent, and allowing the water to drain slowly through the sample release device into a sample container.
The Point Source Bailer can then be decontaminated before taking the next sample.
Specifications:
The Solinst Point Source Bailer is constructed of 316 stainless steel with PTFE ball valves, and o-rings. The sampler comes complete with a stainless steel sample release device to minimize loss of volatiles during transfer to the sample container.
The Solinst Model 103 Tag Line is recommended as a support line for the Point Source Bailer. There is the option of laser marked cable (marked every 1/4 ft. or 5 cm) of laser marked flat tape (marked every 1/100 ft. or each mm), mounted on an easy to use reel.
價格僅供參考,最終采購價格需按簽訂合同為準。