National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒
National Instruments SCXI-1379 前置安裝接線盒

National-Instruments-SCXI-1379-前置安裝接線盒

價格

訂貨量(個)

¥4500.00

≥2

聯系人 張先生 銷售經理

掃一掃添加商家

祺祷祷祻祴祸祹祸祷祹祲

發貨地 福建省廈門市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

廈門雄霸電子商務有限公司

店齡4年 企業認證

聯系人

張先生 銷售經理

聯系電話

祺祷祷祻祴祸祹祸祷祹祲

經營模式

經營批發

所在地區

福建省廈門市

進入店鋪
收藏本店

如果這是您的商鋪,請聯系我們

商品參數
|
商品介紹
|
聯系方式
品牌 National Instruments
系列 SCXI系列
型號 SCXI-1379
類型 模塊/機架/底盤
時間 4小時制
功耗 每個插槽7W
規格 9.8英寸乘7.7英寸乘7.0英寸
重量 8磅
通道 16通道
交流電壓 100-240V
商品介紹

鎳SCXI-1379(零件號:778732-01)能夠配置SCXI-1130開關模塊作為8x32單線矩陣。通過使用軟件,用戶可以控制矩陣將任何行鏈接到任何列。當SCXI-1130模塊被配置為矩陣,它變成一個通用信號路由器。這SCXI 1379 接線盒安裝在的前面SCXI-1130模塊;這接線盒利用螺絲端子將信號和觸發輸入和觸發輸出信號連接到開關模塊。這SCXI-1379可以一起工作國家文書矩陣擴展插頭,通過列鏈接實現即時行擴展。這不需要外部布線。

國家儀器公司SCXI-1379接線板需要使用幾個項目。這些項目包括:矩陣擴展插頭、矩陣擴展電纜、SCXI機箱和SCXI-1130模塊、電線絕緣剝離器、電線切割器、十字螺絲刀和1/8英寸平頭螺絲刀。此外,國家文書建議使用28 AWG線,帶狀或離散線,將信號與SCXI 1379。

上有指定的列螺釘端子、行螺釘端子和擴展連接器鎳SCXI-1379。必要時,可將導線擰入螺絲端子,將信號連接到SCXI-1130模塊。在放置之前,用戶必須確保引線被應力消除條正確加固接線盒掩護到位。當將信號鏈接到接線盒,用戶可以參考手冊中的表格,了解具體說明和顯示拓?fù)涞膱D表。

The NI SCXI-1379 (Part Number: 778732-01) has the capability to configure the SCXI-1130 Switch Module as an 8x32, 1-wire matrix. With the use of software, the user can control the matrix to link to any row(s) to any column(s). When the SCXI-1130 module is configured as a matrix, it turns into a general-purpose signal router. The SCXI 1379 Terminal Block installs on the front of the SCXI-1130 module; the Terminal Block utilizes screw terminals to link signals and the trigger input and trigger output signals to the switch module. The NI SCXI-1379 can work with National Instruments matrix expansion plugs for instantaneous row expansion through column linking. This does not necessitate external wiring.

The National Instruments SCXI-1379 Terminal Block requires several items to be used. These items include: a matrix expansion plug, a matrix expansion cable, an SCXI chassis, an SCXI-1130 module, a wire insulation stripper, a wire cutter, a Philips screwdriver, and a 1/8 inch flathead screwdriver. In addition, National Instruments suggests utilizing 28 AWG wire, either ribbon or discrete, for linking signals with the SCXI 1379.

There are designated column screw terminals, row screw terminals, and expansion connectors on the NI SCXI-1379. Leads can be screwed into the screw terminals as necessary to link signals to the SCXI-1130 module. The user must make sure that the leads are correctly strengthened by the strain relief bar prior to putting the Terminal Block cover in place. When linking signals to the Terminal Block, the user can refer to the table in the manual for specific instructions and diagrams showing the topology.

聯系方式
公司名稱 廈門雄霸電子商務有限公司
聯系賣家 張先生 (QQ:1851269046)
手機 祺祷祷祻祴祸祹祸祷祹祲
地址 福建省廈門市
聯系二維碼