產品名稱：水位溫度計

品牌：Solinst

產地：加拿大

型號：201

Solinst 201型水位溫度 (WLT) 儀表非常適合測量靜態水位，以及井、鉆孔、水箱和開放水域的剖面溫度。

準確的溫度測量值清楚地顯示在面板上的 LCD 讀數上，范圍為 -20oC 至 +125oC。

水位和探頭深度測量值從 Solinst 耐用的激光標記扁平膠帶上讀取。膠帶長度可達 2000 英尺 (600 m)。

201 水位溫度計探頭由優質 316 不銹鋼制成。耐壓探頭可以浸沒到 1000 英尺 (300 m)。探頭上的零測量點靠近尖端，使水位移保持在**限度。探頭護罩保護傳感器尖端。

溫度傳感器位于探頭的不銹鋼尖端，但是，由于探頭主體充當散熱器，因此當探頭完全浸沒時可以獲得**精度。如果需要，膠帶密封塞設計使探頭可以輕松更換。

精確測量 -20oC 至 +125oC 的溫度

膠帶長度可達 2000 英尺 (600 m)

耐用、耐腐蝕、耐化學腐蝕的扁平膠帶

標準 9V 堿性電池可使用 90 小時

8分鐘后自動關機

堅固的獨立卷軸，帶有符合人體工程學的手柄和制動器

無需用戶校準

水溫直接影響水生植物和動物的生物活性，以及??水質和化學的許多方面；因此，它是一個重要的監控參數。

井和開放水域的溫度分析

檢測徑流、流入點或其他熱污染源

水質變化的早期預警，包括溶解氧水平和電導率

監測和預測水生環境的變化

地?zé)徙@探和研究

溫度范圍：    -20.00°C 至 +125.00°C

溫度讀數精度：    +/-0.10oC 從 -5oC 到 +50oC；

+/-0.50oC 超出該范圍

溫度分辨率：    0.01oC

溫度穩定時間：    每 oC 15 秒

探頭壓力等級：    可潛水至 1000 英尺 (300 m)。

探頭重量：    3.07 盎司（87 克）

探頭尺寸：    5/8" 直徑，5.08" 長 (16 mm x 129 mm)

接液材料（膠帶/探針）：    PVDF、山都平、Delrin、Viton、316 不銹鋼

電池壽命：    90 小時

自動關閉：    8 分鐘

標準膠帶長度：    米：30、60、100、150、250、300 英尺：100、200、300、500、750、1000

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water.

Accurate temperature measurements are clearly displayed on an LCD readout on the faceplate, from -20oC to +125oC.

Water level and probe depth measurements are read off the Solinst durable laser marked flat tape. Tape lengths are available up to 2000 ft (600 m).

Water Level & Temperature Probe：

The 201 Water Level Temperature Meter Probe is made of high quality 316 stainless steel. The pressure-proof probe can be submerged to 1000 ft (300 m). The zero measurement point on the probe is close to the tip, keeping water displacement at a minimum. A probe shroud protects the sensor tip.

The temperature sensor is located at the stainless steel tip of the probe, however, since the probe body acts as a heat sink, best accuracy is obtained when the probe is completely submerged. The tape seal plug design allows the probe to be easily replaced, if required.

Water Level Temperature Meter Features：

Accurately measure temperature from -20oC to +125oC

Tape lengths to 2000 ft (600 m)

Durable, corrosion and chemical-resistant flat tape

Standard 9V alkaline battery gives 90 hours of use

Automatic shut-off after 8 minutes

Sturdy, standalone reel with ergonomic handle and brake

No user calibration is required

 

Water Level & Temperature Applications：

Water temperature has a direct affect on the biological activity of aquatic plants and animals, as well as many aspects of water quality and chemistry; therefore, it is an important parameter to monitor.

The Model 201 Water Level Temperature Meter is ideal for:

Profiling temperature in wells and open water

Detecting runoff, points of inflow, or other sources of thermal pollution

Early warning of changes in water quality, including dissolved oxygen levels and conductivity

Monitoring and predicting changes in aquatic environments

Geothermal drilling and studies

WLT Meter Specifications：

Temperature range:    -20.00°C to +125.00°C

Temperature reading accuracy:    +/-0.10oC from -5oC to +50oC;

+/-0.50oC outside of that range

Temperature resolution:    0.01oC

Temperature stabilization time:    15 seconds per oC

Probe pressure rating:    Submersible to 1000 ft (300 m).

Probe weight:    3.07 ounces (87 grams)

Probe size:    5/8" dia., 5.08" long (16 mm x 129 mm)

Wetted materials (tape/probe):    PVDF, Santoprene, Delrin, Viton, 316 stainless steel

Battery life:    90 hours

Auto-off:    8 minutes

Standard Tape lengths:    Meters: 30, 60, 100, 150, 250, 300

Feet: 100, 200, 300, 500, 750, 1000