產品名稱：扁平膠帶標記線

品牌：Solinst

產地：加拿大

型號：103

Solinst 103 型標記線是一種多用途解決方案，用于泵部署、測量井底深度或井下采樣器和數據記錄器的支撐線。

 

用于確保回填的準確放置；水桶部署，泵和封隔器的安全電纜

方便的可拆卸不銹鋼砝碼

Solinst 103 型標記線使用附在激光標記電纜上的重物，該電纜安裝在堅固的獨立式卷軸上。1/16" (1.6 mm) 不銹鋼絞線主要用于安裝監測井以測量井底深度，或回填砂或膨潤土層頂部的深度。

Solinst Tag Line使用附在激光標記電纜或膠帶上的重物，主要設計用于安裝監測井期間使用。標語線還提供了一種簡單的方法來測量井底的深度。

Tag Line 非常適合在安裝 Solinst 403 型CMT 多級系統時使用，因?yàn)槟梢栽谕昃陂g輕松測量回填砂或膨潤土層頂部的深度。它也是多用途標記支撐線的理想選擇。

電纜或膠帶安裝在堅固的獨立式卷軸上，帶有提手、重量支架和制動器。

103 型標簽線還提供 3/8" (10 mm) PVDF 扁平膠帶。該膠帶的斷裂強度大于 220 lbs (100 kg)。它具有厚的狗骨設計，可防止粘附在潮濕的表面上, 并讓它直掛。

膠帶每 1/100 英尺或每毫米帶有激光標記。長度為 100 英尺至 1000 英尺（30 m 至 300 m）。其他長度可根據要求提供。

LM2：英尺和十分之一：每 1/100 英尺標記一次。

LM3：米和厘米：每毫米標記一次

每個標語線都提供了一個磁帶指南。它可以放置在井套管的頂部，以便于使用并保護粗糙邊緣免受損壞。它還可以提高閱讀準確性。

標準不銹鋼標簽重量為 1.5 lbs (0.68 kg)，尺寸為

3/4" x 1 ft. (19 mm x 30 cm)。窄標簽重量為 1/2" x 1 ft. (13 mm x 30 cm) )，重量為 0.65 磅（0.30 千克），也是一種選擇。標簽重物具有錐形末端，以**限度地減少部署和返回表面期間的掛起，并且可以?shī)A在電纜或膠帶上或從電纜或膠帶上夾下來。這允許將卷軸安裝的標記電纜或膠帶用于其他用途。

在建井過程中準確測量回填深度

測量的安全支持線，用于部署泵、水桶、采樣器和封隔器

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

Used to ensure accurate placement of backfill; bailer deployment, safety cable for pumps and packers

Cable version: Laser marked every 1/4 ft. or every 5 cm

PVDF Flat Tape version: marked every 1/100 ft. or each mm

Convenient detachable stainless steel weights

The Solinst Model 103 Tag Line uses a weight attached to a laser marked cable, which is mounted on a sturdy free-standing reel. The 1/16" (1.6 mm) stranded stainless steel wire line is primarily used during the installation of monitoring wells to measure depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer.

Model 103 Tag Line：

The Solinst Tag Line uses a weight attached to a laser marked cable or tape, and is principally designed for use during the installation of monitoring wells. The Tag Line also provides a simple method to measure the depth to the bottom of a well.

The Tag Line is perfect for use when installing Solinst Model 403 CMT Multilevel Systems, as you can easily measure the depth to the top of a backfill sand or bentonite layer during the completion of a well. It is also ideal as a multi-purpose marked support line.

The cable or tape is mounted on a sturdy free-standing reel with a carrying handle, weight holder and brake.

Laser Marked Cable：

The Tag Line uses durable polyethylene coated 1/16" (1.6 mm) stranded stainless steel wireline with a minimum break strength of 270 lbs (122 kg). It comes in standard lengths of 100 ft. to 1000 ft. (30 m to 300 m). Other lengths are available by request.

Markings are clearly and accurately laser etched every 1/4 foot or every 5 centimeters of the cable. The laser markings allow the cable to run smoothly over the Tape Guide.

PVDF Laser Marked Tape：

The Model 103 Tag Line is also available with 3/8" (10 mm) PVDF flat tape. The tape has a break strength of greater than 220 lbs (100 kg). It has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight.

The tape comes with laser markings every 1/100 ft. or each millimeter. Lengths are 100 ft to 1000 ft. (30 m to 300 m). Other lengths are available by request.

LM2: Feet and tenths: with markings every 1/100 ft.

LM3: Meters and centimeters: with markings every mm

Tape Guide：

A Tape Guide is provided with each Tag Line. It can be placed over the top of the well casing for ease of use and to protect from damage on rough edges. It can also increase reading accuracies.

316 Stainless Steel Tag：

The standard stainless steel tag weight is 1.5 lbs (0.68 kg) and measures

3/4" x 1 ft. (19 mm x 30 cm). A narrow tag weight, 1/2" x 1 ft. (13 mm x 30 cm), weighing 0.65 lbs (0.30 kg), is also an option. Tag weights have tapered ends to minimize hang-ups during deployment and return to surface, and can be clipped on and off the cable or tape. This allows the use of the reel-mounted marked cable or tape for other uses.

 

Applications Where Tag Lines Are Useful：

Accurately measure depth to backfill during well construction

Measured safety support line for deployment of pumps, bailers, samplers and packers