宏旭  現澆拱形骨架模板  高速拱形骨架模板

現澆拱形骨架模板  高速拱形骨架模板的尺寸介紹是按照直徑、深度兩個基本數據而定的，對于模具的使用來看，全部都是按照在現場澆筑模式而定，這樣就能更好的滿足制作方便性的要求了。一般來說預制技術和現澆技術都是可以使用的，主要還是根據不同的要求來進行加工制作。首先來說就是需要挑選模具，更多的是建議使用專業的拱形骨架模具來加工，這樣才可以保證整個拱形骨架生產完成后是可以放心使用的，為了能夠更快的施工，使用現澆的技術來制作是比較合適的，可以將整套的拱形骨架模具在現場來進行他的安裝，而且在加工之前要做好場地的保護。現澆拱形骨架模板  高速拱形骨架模板他就是用來幫助公路可以更好的通常，在公路兩側的山體位置進行使用，所以要先將山體上的一些垃圾清理干凈，把坡度相差較大的位置進行一下處理，這樣就可以讓整個模具放置平穩，現場澆筑要注意好他的震動，應該使用振動棒來處理。等到泥漿凝固后就可以將模具拆開了，把制作好的整套拱形骨架預制件來進行加固，可以使用泥土進行回填，然后將泥土夯實。The size introduction of cast-in-place arch skeleton formwork is based on two basic data of diameter and depth. For the use of the formwork, it is all based on the cast-in-place mode, so it can better meet the requirements of manufacturing convenience. Generally speaking, Prefabrication Technology and cast-in-place technology can be used, mainly according to different requirements for processing. First of all, it is necessary to select molds. More importantly, it is recommended to use professional arch framework molds for processing, so as to ensure that the whole arch framework can be safely used after production. In order to be able to construct faster, it is more suitable to use cast-in-place technology for manufacturing. The whole set of arch framework molds can be installed on site and processed Protect the site before. Cast in situ arch skeleton formwork The high-speed arched skeleton formwork is used to help the highway to be better. Usually, it is used at the mountain on both sides of the highway. Therefore, it is necessary to clean up some rubbish on the mountain first, and treat the places with large gradient difference, so that the whole mould can be placed stably. Pay attention to the vibration of the formwork when pouring on site, and use the vibrator to deal with it. After the mud solidifies, the mold can be disassembled, and the whole set of prefabricated arch skeleton can be reinforced. The soil can be used for backfilling, and then the soil will be compacted.