現澆拱形骨架護坡模具是一種能讓混合好的水泥成為所需要形狀的模板，這這種模具主要是由三毫米的面板、五毫米的筋板和經過硬化處理的緊固件構成的，這樣才能讓模具的尺寸精準，形狀大小適應環境的需求，有著很高的硬度來承受荷載?，F(xiàn)澆拱形骨架護坡模具在澆筑的時候應該確保鋼模具的結構形狀和相互的位置是準確的，這樣才能在施工的時候維持平穩，使用的螺栓需要緊固牢靠，這樣能夠承受住在現澆的時候混凝土的重力和對鋼面板的側壓力，同時也能承受施工過程當中設備產生的負荷?，F(xiàn)澆拱形骨架護坡模具尺寸大全主要是圍繞對高鐵、高速公路使用的混凝土拱形骨架的制作而言，一般拱形骨架護坡模板的直徑為3米，也有使用2.5米和4米，根據具體的高度以及10公分的擋水沿，來選擇定制的模板數量以及鋼板的厚度。在護坡模具中，拱形骨架屬于近幾年使用量較多的模板，使用這種模具的好處在于替代了過去使用混凝土六棱塊，直接在現場澆筑的方式節省了人工預制以及安裝的時間和成本，而且該模板可以多次重復的使用，在模具成本方面占的優勢也是挺大的。The cast-in-situ arch skeleton slope protection mold is a kind of formwork that can make the mixed cement into the required shape. This mold is mainly composed of 3mm panel, 5mm rib plate and hardened fasteners, so as to make the size of the mold accurate, the shape large and small, adapt to the needs of the environment, and have high hardness to bear the load. During the pouring of the cast-in-situ arch skeleton slope protection mold, the structural shape and mutual position of the steel mold should be ensured to be accurate, so as to maintain stability during the construction. The bolts used need to be fastened firmly, so as to withstand the gravity of the concrete and the lateral pressure on the steel panel during the cast-in-situ pouring, as well as the load generated by the equipment during the construction process. The large size of cast-in-situ arch skeleton slope protection mold is mainly focused on the production of concrete arch skeleton used for high-speed railway and expressway. Generally, the diameter of arch skeleton slope protection formwork is 3M, and 2.5m and 4m are also used. The number of customized formwork and the thickness of steel plate are selected according to the specific height and 10cm water retaining edge. Among the slope protection molds, the arch skeleton belongs to the formwork used more in recent years. The advantage of using this kind of mold is that it replaces the concrete hexagonal block used in the past, and the method of direct on-site pouring saves the time and cost of manual prefabrication and installation. Moreover, the formwork can be reused for many times, which also has a great advantage in mold cost.